- 连续电压电源，190-350伏恒流电。
- 安装在法兰为80毫米的电机上，扭矩为1.3至3.4Nm。
- 由于优化的工程设计，尽管电机机身驱动器的极限整合与放置，系统并不会降低性能与功率。
- 得益于集成的反馈，产品在速度、精准度和位置控制方面具有极佳的动力回应。
- 反馈：分解器
- 现场总线：CAN Open DS402 – S-CAN, S-NET, modBUS RTU
- 3个数字输入口
- 保护等级：IP55
- 证书：CE
- 2种操作模式：标准或带3个独立档案的定位仪
MID3
DOWNLOAD PDF
| | 9XMID15031.. | 9XMID15032.. | 9XMID15033.. | 9XMID15034.. |
|---|---|---|---|---|
| Voltage Supply Power Stage (Vdc) | 190 .. 310 ±10% |
|||
| Voltage Supply Control Stage (Vdc) | 24 ±15% |
|||
| Output Power (W) | 400 | 750 | 1000 | 1050 |
| Continuous Output Current (A) | 10 | |||
| Peak Output Current (for 2 s) (A) | 20 | |||
| Motor Stall Torque (Nm) | 1,3 | 2,4 | 3,3 | 3,4 |
| Motor Nominal Torque (Nm) | 1,3 | 2,4 | 3,3 | 3,4 |
| Motor Peak Torque (Nm) | 5,5 | 9,1 | 9,1 | 9,1 |
| Motor Nominal Speed (rpm) | 3000 |
|||
| Motor Inertia (kgcm2) | 0.92 | 1.72 | 2.53 | 3.33 |
| Output Frequency (Hz) | Up to 500 | |||
| Switching Frequency PWM (kHz) | 8 |
|||
| Analogue Input | no |
|||
| Digital Input | 3 x +24 Vdc (Drive Enable - Limit Switch 1, 2) |
|||
| Digital Output | no |
|||
| Status Led | For status and alarms warning |
|||
| Feedback Type | Resolver |
|||
| FieIdBUS | CANopen DS402 - ModBUS RTU - S-CAN - S-NET |
|||
| Protection | I2T, thermal |
|||
| Connection Type | 3 x Military Style Connectors |
|||
| Brake management | Integrated; immediate stop or in ramp mode |
|||
| Motor types | Brushless sinusoidal |
|||
| Configuration drive | With Drivewatcher Software |
|||
| Power Loss (W) | ||||
| Operating Temperature (°C) | 0 ... + 40 (max 55°C with de-rating) |
|||
| Storage Temperature (°C) | -25 ... + 85 |
|||
| Humidity | 5% .. 85% (not condensing) |
|||
| Altitude | Up to 1000 m above sea level without derating |
|||
| Weight (kg) | 3,5 | 4,6 | 5,6 | 6,7 |
| Protection degree | IP 55 |
|||
| Certifications | 2014/35/UE - 2014/30/UE - 2011/65/UE - CEI EN 61800-3 2005 - CEI EN 61800-2 - El EN 61800-5-1 2009 |
|||
| UL | No |
|||
9XMIDPS
DOWNLOAD PDF
| | 9XFTPSMID20 |
|---|---|
| Voltage Supply Power Stage (Vac) | 230 3Phase ±10% |
| Supply Frequency (Hz) | 50 / 60 |
| Voltage Supply Control Stage (Vdc) | 24 ±15% |
| Output Power (W) | 3750 |
| n° of MID3 able to connect | 3 |
| Continuous Output Current (ARMS) | 20 |
| Peak Output Current (for 2 s) (ARMS) | 40 |
| Output Frequency (Hz) | n.a. |
| Switching Frequency PWM (kHz) | n.a. |
| Analogue Input | 1 x +/- 10 V differential 12 Bit |
| Analogue Output | No |
| Digital Input | 2 x +24 Vdc |
| Digital Output | 2 x +24 Vdc (Drive OK - Alarm) |
| Status Led | No |
| Keypad | Yes |
| Encoder Input | No |
| Encoder Output | No |
| FieldBUS | CANopen DS402 |
| Protection | I2T, thermal |
| Connection Type | Connectors |
| Brake management | Integrated; immediate stop or in ramp mode |
| Motor types | Brushless sinusoidal - Servo DC |
| Configuration drive | With Drivewatcher Software |
| Power Loss (W) | 21 @ I nominal |
| Operating Temperature (°C) | 0 ... + 40 (de-rate by 50% up to 55°C) |
| Storage Temperature (°C) | -25 ... + 85 |
| Humidity | 5% .. 85% (not condensing) |
| Altitude | Up to 1000 m above sea level without derating |
| Weight (kg) | |
| Protection degree | IP20 |
| Certifications | 2014/35/UE - 2014/30/UE - 2011/65/UE - CEI EN 61800-3 2005 - CEI EN 61800-2 - El EN 61800-5-1 2009 |
| UL Certification | No |